EXSYS EX-3515 Manual

1 Thank you for purchasing this 2-Port SATA3 RAID/HyperDuo PCIe Card. It is designed to support up to 2 SATA3 ports in RAID

2-Port SATA3 RAID/HyperDuo PCIe Card 10 Some broken array is caused by the connection problems. To see if it is the problem, please power off

2-Port SATA3 RAID/HyperDuo PCIe Card 2 The JP1 can be used to disable the BIOS on the card for some critical applications, please leave the jumper

2-Port SATA3 RAID/HyperDuo PCIe Card 3 your computer. If you want to configure your RAID drives, press and hold the 2 keys, Ctrl and

2-Port SATA3 RAID/HyperDuo PCIe Card 4 request is made, the RAID controller selects the drive positioned closest to the requested data,

2-Port SATA3 RAID/HyperDuo PCIe Card 5 HyperDuo enables two modes: Safe Mode and Capacity Mode. Both modes automatically identify LBA

2-Port SATA3 RAID/HyperDuo PCIe Card 6 Turn on your computer and press <Ctrl> and <M> keys to enter BIOS Setup during the POST (Powe

2-Port SATA3 RAID/HyperDuo PCIe Card 7 To further configure the disk array, use the up or down arrow key to move the selection bar to sel

2-Port SATA3 RAID/HyperDuo PCIe Card 8 sure to press <F10> in the main screen. Press <Y> to confirm or <N> to cancel. 9.

2-Port SATA3 RAID/HyperDuo PCIe Card 9 Note: Please refer to the manual file of Marvell Storage Utility (MSU) on the CD (in the same folder